How to Replace the Mythic Clipper Front Lid with Clear Window

Quick Answer

To replace the Mythic clipper front lid with clear window, simply snap off the old lid and snap on the new one—no tools required. This guide walks you through each step and highlights common pitfalls.

Step-by-Step Replacement Process

1. Power Off and Unplug: Ensure the clipper is turned off and unplugged from any power source. This prevents accidental start-up during the replacement. Always double-check that the clipper is completely off before handling.
2. Remove the Old Lid: Gently pry the old lid away from the clipper body. Use your fingers or a plastic spudger to avoid scratching the surface. The lid should pop off with minimal force. If the lid doesn't come off easily, check for hidden screws or clips; do not force it.
3. Align the New Lid: Position the new lid over the clipper body, aligning the clips with the corresponding slots. Ensure the clear window is oriented correctly. Misalignment can cause the lid to sit unevenly or crack the window.
4. Snap the Lid into Place: Press down evenly on the lid until you hear a click. This indicates the clips are engaged. Test the lid by gently tugging to ensure it's secure. If it doesn't click, remove and realign; do not press too hard as it may break the clips.
5. Test the Clipper: Plug in the clipper and turn it on briefly to ensure the lid doesn't interfere with the motor or moving parts. Check that the clear window is clean and unobstructed. If you hear unusual noise or vibration, turn off immediately and recheck the lid installation.

Product Facts

• Replacement Part Mythic Clipper Spare Front Lid with Clear Window: The replacement lid features a snap-on design for easy installation and a clear window to showcase the motor. You can replace the lid in seconds without any tools, and the clear window adds a visual appeal while allowing you to monitor the motor's condition.