Evo Nano Mister Cup Replacement: Install Guide
By Stylecraft US | Published: 2026-10-30
Category: How-to Guides
Learn how to swap the replacement cup on your Evo Nano Mister sprayer. Step-by-step instructions, common mistakes, and tips for barbers and home users.
Quick Answer
To replace the cup on your Evo Nano Mister, unscrew the old jar, screw on the new replacement cup hand-tight, and test for leaks before filling.
Why Use a Replacement Cup?
The Evo Nano Mister's clear plastic jar holds 13 oz of liquid, giving you extended misting time for hair, skin, or surfaces. Over time, the original jar may crack, wear, or simply need a spare for different products. Using a dedicated replacement cup ensures a proper seal and avoids leaks that could waste product or create a mess.
A common trade-off: the replacement cup is sold as a single jar or a 6-pack. Buying the pack gives you spares for different liquids (e.g., water, leave-in conditioner, or sanitizer), but you'll need to label each to avoid confusion.
Step-by-Step Installation Guide
- Remove the Old Cup: Hold the sprayer body firmly and unscrew the old jar counterclockwise. Dispose of any remaining liquid properly. If the jar is stuck, run warm water over the threads for a few seconds to loosen them. Do not use tools to pry the jar off—this can damage the sprayer threads.
- Prepare the New Replacement Cup: Take the new replacement cup and remove the white cap. Inspect the threads and the rubber gasket (if present) for any debris or damage. A clean seal is essential for leak-free operation. If the gasket is missing or damaged, the cup will leak. Check before installing.
- Attach the New Cup: Align the threads of the new jar with the sprayer head and screw it on clockwise until it is hand-tight. Do not overtighten—plastic threads can strip easily. Overtightening can crack the jar or damage the seal. Stop as soon as you feel resistance.
- Test for Leaks: Fill the cup with a small amount of water (about an inch), replace the white cap, and pump the mister a few times. Hold the sprayer upside down over a sink for 10 seconds. No water should escape from the seal. If you see drips, remove the cup, check the gasket alignment, and reinstall. Do not fill with expensive product until the seal is confirmed.
- Fill and Use: Once the seal is verified, fill the cup with your desired liquid (water, toner, leave-in conditioner, etc.) up to the 13 oz mark. Replace the white cap for storage or leave it off for immediate use. The mister is ready. Label the cup if you use multiple liquids to avoid cross-contamination.
Product Details
- Replacement Cup for Evo Nano Mister Single: Clear plastic replacement jar with white cap, 13 oz capacity, designed for the GAMMA+ Evo Nano Mister sprayer. The 13 oz capacity provides longer misting sessions without refills, and the clear plastic lets you see the liquid level at a glance.
Replacement Cup for Evo Nano Mister Single
