How to Install a Standard 2-Hole Blade Bracket

By Stylecraft US | Published: 2026-10-27

Category: How-to Guides

Learn how to install a standard 2-hole blade bracket on your clipper with this step-by-step guide, including common mistakes to avoid.

Quick Answer

To install a standard 2-hole blade bracket, remove the old bracket, position the new one over the blade screws, and tighten them evenly. Ensure the bracket sits flush to keep your blades stable.

Why the Bracket Matters

The blade bracket is a fundamental component of your clipper. It holds the blades firmly in place, providing stability and ensuring consistent cutting performance. A loose or worn bracket can cause blades to shift, leading to uneven cuts or damage to the blade edges.

A standard 2-hole bracket is compatible with both click and floating levers, making it a versatile replacement for many StyleCraft and Gamma+ models. Its stainless-steel construction offers durability, but proper installation is key to getting the most from it.

Choosing the Right Bracket

Before purchasing a replacement, confirm that your clipper uses a 2-hole bracket. Most clippers have either two or four mounting holes. The 2-hole design is common on many professional models, but always check your clipper's manual or measure the hole spacing to ensure compatibility.

If you're unsure about the exact model, the Standard 2-Hole Blade Bracket from Stylecraft US is designed to fit StyleCraft and Gamma+ clippers, but it's always wise to verify with your specific model number.

Installation Steps

Gather Tools and Prepare the Clipper: Unplug the clipper and remove the blade assembly by loosening the two screws that secure it. Keep the screws and any springs or levers in a safe place. Clean the blade area with a dry cloth to remove hair and debris. Always work on a clean, unplugged clipper to avoid accidents.
Remove the Old Bracket: If a bracket is already installed, lift it off the mounting posts or screws. Some clippers may have a small clip or spring that holds the bracket; gently release it without bending the metal. Inspect the old bracket for wear—if it's bent or cracked, replace it even if you're only changing blades.
Position the New Bracket: Place the new 2-hole bracket over the two mounting posts or screws. Ensure the holes align perfectly and the bracket sits flat against the clipper body. If it doesn't seat flush, check for debris or misalignment. A bracket that doesn't sit flush can cause blade chatter or uneven cutting.
Reattach the Blade Assembly: Put the blade assembly back on top of the bracket, aligning the screws. Tighten the screws evenly—alternate between them to avoid tilting. Do not overtighten; the blade should move slightly with the lever but not wobble. Overtightening can strip the screws or crack the blade; finger-tight plus a quarter turn is usually enough.
Test the Lever and Cutting Action: Plug in the clipper and test the lever action (click or floating). Run the clipper for a few seconds to check for unusual noise or vibration. If the blade feels loose or the lever sticks, recheck the bracket alignment and screw tightness. If the lever doesn't move smoothly, the bracket may be installed upside down or the blade is misaligned.

Product Facts

Standard 2-Hole Blade Bracket: Fits StyleCraft and Gamma+ clipper models; works with both click and floating levers; made of durable stainless steel. This bracket is a reliable, universal replacement that keeps your blades secure without needing to match a specific lever type.
Standard 2-Hole Blade Bracket