How to Replace the Power Switch on Any Clipper

Quick answer

Replace a broken clipper power switch by opening the housing, disconnecting the old switch, and installing a compatible replacement part like the Absolute Alpha On/Off Switch Piece.

Step-by-step guide

1. 1. Unplug and remove the blade: Unplug the clipper completely. Remove the blade assembly according to your model's instructions, typically by loosening two screws. This exposes the housing screws underneath. Always unplug first—live clippers can short circuit during disassembly.
2. 2. Open the housing: Remove all visible screws from the clipper body. Use a small flathead screwdriver to gently pry the housing halves apart at the seam. Work slowly to avoid breaking plastic tabs. Keep screws organized by size and location; mixing them up can strip threads.
3. 3. Disconnect the old switch: Locate the power switch on the circuit board. Note how the wires attach—usually via a small connector or solder points. Desolder or unplug the wires, then remove the switch from its slot. Take a photo of the wire positions before disconnecting to guide reinstallation.
4. 4. Install the new switch: Insert the replacement switch into the housing slot. Reconnect the wires to the same terminals, soldering if necessary. Ensure the switch clicks firmly when pressed. Double-check that the switch is oriented correctly; reversing polarity may prevent operation.
5. 5. Reassemble and test: Align the housing halves and press together until they snap or fit flush. Reinstall all screws and the blade assembly. Plug in the clipper and test the switch through several on/off cycles. If the switch feels stiff or doesn't click, reopen to check for pinched wires or misalignment.

Product facts

• Power On/Off Switch Piece (compatible with all clippers with switches): The Absolute Alpha On/Off Switch Piece is a seamless replacement solution designed specifically for clipper switches. Using a part made for your model ensures correct fit and avoids forcing contacts, which can damage the circuit board.